Skip to main content

Wet Pit Pumps - AFV

BRAND: Flowserve

The Flowserve AFV axial flow suspended shaft vertical pump is a single stage propeller type design. This family of pumps is specifically designed for low head movement of water for a multitude of municipal, agricultural and industrial services.

Product Highlights

Industries

  • Water

Industry Sectors

  • Water
  • Waste Water
  • Agriculture
  • Water Management

Standards

  • Flowserve
  • Hydraulic Institute
  • AWWA E103

Operating Parameters

  • Flows to 181 700 m3/h (800 000 gpm)
  • Heads to 11 m (35 ft)
  • Speeds to 1770 rpm

Design Range

Size Range:
Sizes 200 mm (8 in) to 3.1 m (123 in)
Settings to 8 m (25 ft)

Features and Benefits

  • Three- or Four-Vane Axial Flow Propeller is hydraulically balanced via pressure equalizing balance holes and a top propeller hub wear ring to reduced axial down thrust.
  • Outer Flanged Columns are bolted together with through bolts for ease in assembly.
  • Alignment is maintained via centering fits on all parts.
  • Flared Suction Bell provides a smooth waterway entrance to the impeller and has integral splitters to reduce inlet swirl and entrance losses.
  • Stator Case With Integral Diffuser Vanes may be either a single-piece casting or a fabrication.
  • Discharge Elbow may be located above or below ground and at any outlet orientation.
  • Seal Chamber accepts packing or mechanical seal to suit service requirements.

Configurations

Low Lift

Industries

  • Water

Industry Sectors

  • Water
  • Waste Water
  • Agriculture
  • Water Management

Standards

  • Flowserve
  • Hydraulic Institute
  • AWWA E103

Operating Parameters

  • Flows to 181 700 m3/h (800 000 gpm)
  • Heads to 11 m (35 ft)
  • Speeds to 1770 rpm

Design Range

Size Range:
Sizes 200 mm (8 in) to 3.1 m (123 in)
Settings to 8 m (25 ft)

Features and Benefits

  • Three- or Four-Vane Axial Flow Propeller is hydraulically balanced via pressure equalizing balance holes and a top propeller hub wear ring to reduced axial down thrust.
  • Outer Flanged Columns are bolted together with through bolts for ease in assembly.
  • Alignment is maintained via centering fits on all parts.
  • Flared Suction Bell provides a smooth waterway entrance to the impeller and has integral splitters to reduce inlet swirl and entrance losses.
  • Stator Case With Integral Diffuser Vanes may be either a single-piece casting or a fabrication.
  • Discharge Elbow may be located above or below ground and at any outlet orientation.
  • Seal Chamber accepts packing or mechanical seal to suit service requirements.

Configurations

Low Lift

Parts & Services

Our global expertise and local service centers ensure that you stay up and running.

Virtual Plant

Use Flowserve VirtualPlant 3D models of various plant types to help you 'see' our capabilities in key industrial applications.

Explore Now

have-questions-normal

Have Questions?

Sales Locator