Skip to main content

Product Search

You have filtered by:

Brand: Flowserve
Isobaric Technology - DWEER

The Calder DWEER work exchanger is the most efficient energy recovery device (ERD) ever developed. It can recover up to 98% of the energy in the brine waste stream, which is then used to pressurize raw water and reduce the energy input for the high-pressure feed pumps up to 60%. With the DWEER, the high-pressure pump does not have to be connected to the energy recovery device. This permits the use of fewer, but larger, more efficient pumps.

Brand: Flowserve

Metal Bellows Seals - BRC

BRC Series edge-welded metal bellows seals are exceptionally robust and designed to seal high-temperature hydrocarbons, heat transfer fluids and severe services in refineries and hydrocarbon processing plants. The BRC series is fully compliant with API 682 Type C requirements and features thick-plate Alloy 718 bellows convolutions for superior corrosion resistance.

Brand: Flowserve

Metal Bellows Seals - BX

BX Series balanced metal bellows seals are engineered to drive exceptional, long-term equipment reliability and lower energy consumption. They provide exceptional reliability in corrosive and non-corrosive fluids, especially fluids that crystallize or coke in atmospheric conditions. The BX Series is fully compliant with API 682 Type B requirements. Available in single and dual seal configurations.

Brand: Flowserve

Metal Bellows Seals - BXRH/BXHHS

BXHHS and BXRH seals provide sealing capability at extreme temperatures in challenging refinery and petrochemical services. When pumping services push beyond temperature limits of elastomers, BXHHS and BXRH seals offer reliable sealing in both single and dual seal configurations. BXHHS and BXRH seals are fully compliant with API 682 Type C requirements.

Brand: Flowserve

Mixer Seals - ISC2-MW

Standard Dual pusher seal for mixer service.

Brand: Flowserve

Mixer Seals - MWC-200

The MWC-200 Mixer Seal is a high-engineered dual pusher seal for large size mixers.

Brand: Flowserve

Mixer Seals - ST

The ST Mixer Seal is a bottom entry mixer seal for sterile applications.

Brand: Flowserve

Multiphase Twin Screw Pumps - MP1

The MP1 is a double suction, twin screw pump designed for continuous service in high viscosity applications where multiple phases are expected. With its unique double case design, it acts inherently as a separator to run multiphase products up to 100% gas void fractions at a wide range of flow rates, pressures, and viscosities. 

Brand: Flowserve

Nuclear Primary Pump Seals - N-Seals

The result of years of research, thousands of hours of rigorous testing and decades of primary pump application experience, the Flowserve N-Seal primary pump seal represents the nuclear industry’s most advanced mechanical seal technology. With each of three stages capable of sustaining 100% system pressure, the N-Seal has successfully provided proven service life and fail-safe redundancy in Flowserve Byron Jackson® primary coolant pumps for years.

Brand: Flowserve

Nuclear Pumps - CA

The CA pump is designed specifically for nuclear safety injection service. This radially split, between-bearing, multistage design complies with ASME Section III, Class 2 and 3.

Brand: Flowserve

Nuclear Pumps - CAV

This ASME Section lll, Class 2 and 3 pump is designed for chemical and volume control system charge service with boiling water reactors (BWR), pressurized water reactors (PWR), and pressurized heavy-water reactors (PHWR).

Brand: Flowserve

Nuclear Pumps - DVSR

Engineered for reactor and steam generator feed applications, this pump meets ASME Section Vlll design standards. It is a proven performer in nuclear-rated services.

Brand: Flowserve

Nuclear Pumps - DVSS

This ASME Section lll, Class 1 is designed for primary coolant, reactor re-circulation and primary heat transport service with Boiling Water Reactors (BWR), Pressurized Water Reactors (PWR), and Pressurized Heavy-Water Reactors (PHWR).

Brand: Flowserve

Nuclear Pumps - EG

The EG is a single stage, double suction, radial split case, heavy duty process pump, specifically designed for component cooling water service for the AREVA nuclear plants. Conforming to ASME Section III, Class 3, it features centerline mounting and suction with discharge flange in the top portion of the pump casing.

Brand: Flowserve

Nuclear Pumps - HDR

Nuclear boiler feed/start up pump. A double case, single stage between bearing design with diffuser insert.

Brand: Flowserve

Nuclear Pumps - MEV

The MEV is a bottom suction, side discharge vertical pump. The pump is equipped with a mechanical seal and grease lubricated bearings. Compliant with ASME Section III, Class 3, it is applied in water services in fossil and nuclear power plants

Brand: Flowserve

Nuclear Pumps - RLIJ

This ASME Section lll, Class 2 and 3 pump is designed for chemical and volume control system charge service with boiling water reactors (BWR), pressurized water reactors (PWR), and pressurized heavy-water reactors (PHWR).

Brand: Flowserve

Nuclear Pumps - WDF

The WDF is a vertical, single stage pump specifically designed for safety related shutdown services in nuclear power plants. It features bottom suction and side discharge for a compact piping arrangement.

Brand: Flowserve

OEM and Special Duty Seals - BulkTite

Dry running, non-wearing, non-damaging and low maintenance seal for powder and bulk solids handling equipment.

Brand: Flowserve

OEM and Special Duty Seals - Circpac MD Circumferential Bushing

Circpac MD seals are a segmented circumferential seal designed for fans, blowers, dryers, turbines, centrifuges and other rotating equipment. Circpac MD seals come packaged in a convenient split housing for easy installation. Standard designs consistently outperform packing, bushings, labyrinths, and felt seals with lower gas consumption over a wider range of operating conditions.

Brand: Flowserve

pages: