Durco® Mark 3™ ASME (ANSI) Metallic Sealed Chemical Process Pump
Durco Mark 3 is a proven ASME (ANSI) B73.1 chemical process pump built for demanding applications. Its pioneering reverse-vane design avoids the trade-off between efficiency and reliability imposed by traditional semi-open impeller designs. A versatile pump platform with a wide range of configurations, including mechanically sealed, dynamically sealed, low-flow, self-priming and recessed impeller.
... Read more Read less- Reverse vane impeller reduces total cost of ownership by simplifying maintenance and delivering renewable, high-efficiency performance over the pump’s life
- SealSentry seal chamber creates an ideal seal environment, increasing reliability and extending mechanical seal life
- Optimal, predictable seal chamber pressures are re-established after every impeller setting, making maintenance easier and more consistent
- Robust shaft and bearing designs minimize shaft deflection to help extend mechanical seal and bearing life
- The external impeller adjustment mechanism enables fast, accurate settings and supports in-shop reverse vane impeller adjustment with full back pull-out design advantages
ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
- Flows to 4540 m3/h (20000 gpm)
- Heads to 215 m (700 ft)
- Pressures to 27 bar (400 psi)
- Temperatures from -75°C (-100°F) to 370°C (700°F)
Size Range: Sizes from 25 mm (1 in) to 200 mm (8 in)
Durco Mark 3 ASME Lo-Flo - Low Flow and High Head
The Durco Mark 3 Lo-Flo pump is designed to improve pump reliability and performance in low-flow, high-head applications. Its innovative radial vane impeller and circular, concentric casing was developed to reduce radial loads and shaft vibration while extending bearing and mechanical seal life.
Durco Mark 3 Unitized Self Primer - Suction Lift
The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.
Durco Mark 3 Recessed Impeller - Vortex Solids Handling
The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller.
Durco Mark 3 ASME In-Line - Vertical Orientation
The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM).
Durco Mark 3 Group 4 - Above ASME Flows and Heads
Designed to complement the Durco Mark 3 ANSI pump product line, the new Mark 3 Group 4 design offers flow rates to 4540 m3/h (20 000 US gpm), well beyond traditional ANSI sizes. Outside the scope of the ANSI performance and dimensional requirements, the Group 4 is designed for maximum reliability and efficiency in demanding applications.
Durco Mark 3 Sealmatic Pump
TheDurco Mark 3 Sealmatic pump uses a dynamically sealing repeller to eliminate the need for mechanical seals in tough to seal services. This pump conforms to ANSI B73.1M standards and is completely interchangeable with the industry leading Mark 3A power end.
Documents & Support
