Operational safety, environmental concern and long-term reliabilty, are the three aspects which make this pump an ideal choice for thermal oils up to 350°C (662°F). High-end hydraulic efficiency is complimented by almost maintenance-free operation, in which to give a low Life-Cycle cost solution. Shaft sealing can be either a combiniation of mechanical and secondary lip seals.
The Bearing Gard employs static and dynamic sealing technologies to prevent ingress of contaminants into the bearing housing and ensure oil retention, even when the equipment is shut down.
To get a quote for Bearing Gard and talk to one of our representatives, please submit your information here.
The Bearing Gard with Electrical Grounding is specifically designed for VFD driven motors to prevent failure from electrical fluting and contamination ingress.
To get a quote for the Bearing Gard with Electrical Grounding and talk to one of our representatives, please submit your information here.
Offered in several sizes to fit the application, Flowserve cyclone separators are designed to efficiently remove sand, pipe scale and other abrasive particles from Plan 31 seal flush Piping Plans. Separation is accomplished by centrifugal force generated by differential pressure across the cyclone.
The Flowserve magnetic separator is designed for use inline with seal coolers used in Plan 23 Piping Plans. Magnetic separators created a magnetic field that separates and holds iron oxide particles from the process liquid to prevent them from causing abrasion, hang-up, or clogging.
Designed to improve the mean time between planned maintenance (MTBPM) of your rotary equipment by improving the environment in the seal area. Tough, unitized construction - engineered flow control valve, flow tube, metering float, pressure gauge, check valve, and pipe connections are combined with an optional alarm into a compact package to provide total control of the sealing environment.
The SLD seal support system from Flowserve dispenses lubrication to the atmospheric side of mechanical seals. It is ideal for seals subjected to periods of dry running or cavitation when product liquid (pumpage) does not provide adequate film between seal faces. The SLD is proven to greatly extend flushless seal life in harsh slurry conditions.
The Valtek NT 3000 Series Electro-Pneumatic Transducer is an active I/P Transducer that is used with a milliamp electricl control signal. It is interchangeable with the XL Series or Beta Series Pneumatic Positioners and can be mounted on either Valtek Linear or Valtek Rotary Actuators without modification.
The pneumatic P5 and the electro pneumatic EP5 are fast and accurate general purpose positioners available in pneumatic (P5) or electropneumatic (EP5) configurations.Choose from explosion-proof (EP5-EX), fail freeze (EP5-FS) and intrinsically safe (EP5-IS) options.
The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where deviations to API 610 are accepted. This pump provides users with the important mechanical, hydraulic, emissions control and safety components required by the latest ISO 13709/API 610 standards.