The Bearing Gard employs static and dynamic sealing technologies to prevent ingress of contaminants into the bearing housing and ensure oil retention, even when the equipment is shut down.
To get a quote for Bearing Gard and talk to one of our representatives, please submit your information here.
The Bearing Gard with Electrical Grounding is specifically designed for VFD driven motors to prevent failure from electrical fluting and contamination ingress.
To get a quote for the Bearing Gard with Electrical Grounding and talk to one of our representatives, please submit your information here.
Offered in several sizes to fit the application, Flowserve cyclone separators are designed to efficiently remove sand, pipe scale and other abrasive particles from Plan 31 seal flush Piping Plans. Separation is accomplished by centrifugal force generated by differential pressure across the cyclone.
This series of Gestra pressure transmitters has been designed to cover a broad range of standard industrial applications.
Compact design and robust construction make these instruments universally suitable for all pressure measurement applications. The pressure transmitters can operate from non-stabilized 10 to 30 V DC power supplies and provide standardized 4-20 mA output signals (two-wire system).
Gestra Temperature Sensors are temperature sensors according to DIN EN 14597. The temperature feeler Pt 100 integrated in the protection tube has a temperature-specific resistance. The temperature switches TRS 5-6 or TRS 5-8 measure the resistance and give an alarm according to the limit settings. Application in steam and (pressurized) hot water installations to TRD 604 and all kinds of heat generating units.
The temperature transmitter TRV 5-40 is designed for the connection of three temperature sensors TRG 5-6x.
The temperatures measured by the temperature sensors are converted by the temperature transmitter TRV 5-40 and sent to the CAN bus in the form of a data telegram. The data are transferred via CAN bus, using the CANopen protocol.
Universal controller KS92 is suitable for single closed-loop control systems and for automating industrial processes.
The equipment is highly flexible and an economical and efficient solution for many industrial applications. The controller is self
tuning during start-up and to the set point. An optional serial interface RS 422/485 is also available. The configuration and parametrization data are stored in an EEPROM.
The Flowserve magnetic separator is designed for use inline with seal coolers used in Plan 23 Piping Plans. Magnetic separators created a magnetic field that separates and holds iron oxide particles from the process liquid to prevent them from causing abrasion, hang-up, or clogging.
Designed to improve the mean time between planned maintenance (MTBPM) of your rotary equipment by improving the environment in the seal area. Tough, unitized construction - engineered flow control valve, flow tube, metering float, pressure gauge, check valve, and pipe connections are combined with an optional alarm into a compact package to provide total control of the sealing environment.
The SLD seal support system from Flowserve dispenses lubrication to the atmospheric side of mechanical seals. It is ideal for seals subjected to periods of dry running or cavitation when product liquid (pumpage) does not provide adequate film between seal faces. The SLD is proven to greatly extend flushless seal life in harsh slurry conditions.
The pneumatic P5 and the electro pneumatic EP5 are fast and accurate general purpose positioners available in pneumatic (P5) or electropneumatic (EP5) configurations.Choose from explosion-proof (EP5-EX), fail freeze (EP5-FS) and intrinsically safe (EP5-IS) options.