
Pusher Seals - RA
BRAND: Durametallic
A single balanced seal designed to mount outside the seal chamber. No wetted metal parts (RA-C) reduce seal costs for highly corrosive services, especially on non-metallic pumps. Installs easily on the outside of the seal chamber and is suitable for metallic and nonmetallic equipment such as plastic, glass, and lined designs.
Product Highlights
Industries
- General Industry
- Chemicals
- Water
- Power
Industry Sectors
- Pulp & Paper
- Mining
- Steel & Primary Metals
- Food & Beverage
- Corn Wet Milling & Ethanol
- Other Industries
- Basic (Organic & Inorganic)
- Specialty (Fine & Consumer)
- Biofuels
- Pharmaceutical
- Water
- Waste Water
- Agriculture
- Water Management
- Nuclear
- Conventional Steam
- Geothermal
- Combined Cycle
- Concentrated Solar Power (CSP)
- Biomass and MSW
Operating Parameters
Up to 400 psi (27.6 bar)
Up to 400°F (204°C)
Up to 75 fps (23 m/s)
0.500 to 5.000 inch
(13 to 127 mm)
Features and Benefits
- Seal faces and elastomers are the only wetted components and are readily available in a wide range of materials for proper corrosion resistance.
- RA seal uses a composite rotor with an economical seal face insert. RA-C seal uses a solid ceramic rotor with a protective PTFE shroud.
- Drive collar, springs, and drive pins are isolated from the product to avoid the need for expensive alloys in highly corrosive services.
Industries
- General Industry
- Chemicals
- Water
- Power
Industry Sectors
- Pulp & Paper
- Mining
- Steel & Primary Metals
- Food & Beverage
- Corn Wet Milling & Ethanol
- Other Industries
- Basic (Organic & Inorganic)
- Specialty (Fine & Consumer)
- Biofuels
- Pharmaceutical
- Water
- Waste Water
- Agriculture
- Water Management
- Nuclear
- Conventional Steam
- Geothermal
- Combined Cycle
- Concentrated Solar Power (CSP)
- Biomass and MSW
Operating Parameters
Up to 400 psi (27.6 bar)
Up to 400°F (204°C)
Up to 75 fps (23 m/s)
0.500 to 5.000 inch
(13 to 127 mm)
Features and Benefits
- Seal faces and elastomers are the only wetted components and are readily available in a wide range of materials for proper corrosion resistance.
- RA seal uses a composite rotor with an economical seal face insert. RA-C seal uses a solid ceramic rotor with a protective PTFE shroud.
- Drive collar, springs, and drive pins are isolated from the product to avoid the need for expensive alloys in highly corrosive services.
- Related Literature
- Technical Information
- Online Tools