
Slurry Pumps - LC
BRAND: Flowserve
The LC chemical slurry pump is a horizontal, frame mounted, single stage, end suction design with a tangential discharge nozzle. It is engineered to withstand the rigor of applications that are both abrasive and corrosive.
Product Highlights
Industries
- General Industry
- Chemicals
- Water
Industry Sectors
- Pulp & Paper
- Mining
- Corn Wet Milling & Ethanol
- Other Industries
- Basic (Organic & Inorganic)
- Specialty (Fine & Consumer)
- Biofuels
- Pharmaceutical
- Water
- Water Management
Standards
Flowserve
Operating Parameters
- Flows to 8000 m3/h (35200 gpm)
- Heads to 90 m (300 ft)
- Pressures to 25 bar (360 psi)
- Temperatures to 140°C (285°F)
- Specific gravities to 1.7
Design Range
Size Range: Discharge Sizes from 50 mm (2 in) to 450 mm (18 in)
Features and Benefits
- Concentric casing with tangential discharge
- Rigid, one-piece bearing frame with two angular contact outboard bearings and roller inboard bearings
- Large diameter, heavy-duty shaft
- Choice of shaft sealing options – Wet gland packing – Single or double mechanical seal – High-pressure double mechanical seal – Special high solids seals – Alumina industry seal
- Choice of materials of construction
- Multiple impeller designs
- Direct-coupled or belt-driven
- Choice of six drive arrangements
- Options – Inducer – Stuffing box cooling system
Configurations
PL-C
Cantilever, chemical slurry sump
LC-S
Lineshaft, chemical slurry sump
Industries
- General Industry
- Chemicals
- Water
Industry Sectors
- Pulp & Paper
- Mining
- Corn Wet Milling & Ethanol
- Other Industries
- Basic (Organic & Inorganic)
- Specialty (Fine & Consumer)
- Biofuels
- Pharmaceutical
- Water
- Water Management
Standards
Flowserve
Operating Parameters
- Flows to 8000 m3/h (35200 gpm)
- Heads to 90 m (300 ft)
- Pressures to 25 bar (360 psi)
- Temperatures to 140°C (285°F)
- Specific gravities to 1.7
Design Range
Size Range: Discharge Sizes from 50 mm (2 in) to 450 mm (18 in)
Features and Benefits
- Concentric casing with tangential discharge
- Rigid, one-piece bearing frame with two angular contact outboard bearings and roller inboard bearings
- Large diameter, heavy-duty shaft
- Choice of shaft sealing options – Wet gland packing – Single or double mechanical seal – High-pressure double mechanical seal – Special high solids seals – Alumina industry seal
- Choice of materials of construction
- Multiple impeller designs
- Direct-coupled or belt-driven
- Choice of six drive arrangements
- Options – Inducer – Stuffing box cooling system
Configurations
PL-C
Cantilever, chemical slurry sump
LC-S
Lineshaft, chemical slurry sump
- Related Literature
- Technical Information
- Online Tools