Skip to main content
SIHI ZTN Pump

Industrial Process Pumps - ZTN, ZTK, ZTI

BRAND: SIHI

Operational safety, environmental concern and long-term reliabilty, are the three aspects which make this pump an ideal choice for thermal oils up to 350°C (662°F). High-end hydraulic efficiency is complimented by almost maintenance-free operation, in which to give a low Life-Cycle cost solution. Shaft sealing can be either a combiniation of mechanical and secondary lip seals.

Product Highlights

Industries

  • General Industry
  • Chemicals
  • Water
  • Oil & Gas
  • Power

Industry Sectors

  • Food & Beverage
  • Other Industries
  • Specialty (Fine & Consumer)
  • Biofuels
  • Pharmaceutical
  • Water
  • Water Management
  • Downstream Processing
  • Conventional Steam
  • Combined Cycle
  • Biomass and MSW

Standards

Hydraulic Institute European Regulation No. 547/2012, EN 733/ISO 2858, DIN 5199 and ISO 9908

Operating Parameters

Flow: max. 1000 m²/h (4403 US gpm)
Heads: max. 90m (295 ft)
Pressure: to PN 16 (232 psi)
Temperature: max. 350°C (662°F)

Design Range

Sizes from 32 mm (1.25 in) to 200 mm (8 in)

Features and Benefits

  • Long lasting efficiency with closed impellers
  • High efficiency and low power with advanced fluid dynamic design
  • Low NPSH due to high quality impeller and suction profile
  • Robust rotating assembly with long-life ball bearing and sleeve bearings
  • Stable with temperature fluctations
  • Back pull out design
  • Triple protection with mechanical seal backed by lip seals and bearing assembly
  • Enhanced seal life with heat dissipation with air fin

Configurations

Bare shaft design ZTN
Close coupled design ZTK
Inline design ZTI

Industries

  • General Industry
  • Chemicals
  • Water
  • Oil & Gas
  • Power

Industry Sectors

  • Food & Beverage
  • Other Industries
  • Specialty (Fine & Consumer)
  • Biofuels
  • Pharmaceutical
  • Water
  • Water Management
  • Downstream Processing
  • Conventional Steam
  • Combined Cycle
  • Biomass and MSW

Standards

Hydraulic Institute European Regulation No. 547/2012, EN 733/ISO 2858, DIN 5199 and ISO 9908

Operating Parameters

Flow: max. 1000 m²/h (4403 US gpm)
Heads: max. 90m (295 ft)
Pressure: to PN 16 (232 psi)
Temperature: max. 350°C (662°F)

Design Range

Sizes from 32 mm (1.25 in) to 200 mm (8 in)

Features and Benefits

  • Long lasting efficiency with closed impellers
  • High efficiency and low power with advanced fluid dynamic design
  • Low NPSH due to high quality impeller and suction profile
  • Robust rotating assembly with long-life ball bearing and sleeve bearings
  • Stable with temperature fluctations
  • Back pull out design
  • Triple protection with mechanical seal backed by lip seals and bearing assembly
  • Enhanced seal life with heat dissipation with air fin

Configurations

Bare shaft design ZTN
Close coupled design ZTK
Inline design ZTI

Parts & Services

Our global expertise and local service centers ensure that you stay up and running.