Skip to main content

Product Search

You have filtered by:

Product Category: Valves

Product Type: Ball Valves

Product Subtype: Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves - Double Block and Bleed

Double Block and Bleed Valve is a side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil and gas applications. It requires two in-line isolation valves and a bleed valve used to drain or vent trapped fluid between the two closure elements in order to safely isolate the downstream pipe. This feature can be achieved with one single valves complete with a bleed port between the obturators.

Brand: Valbart

Trunnion Mounted Ball Valves - FK76C

The FK76C split-body, full-bore, trunnion-mounted ball valve represents the highest standards in valve technology. Its superfinefinished, trunnion-mounted ball design is just one of its many important design features. Among them are an anti-blow out stem, long-life, double-stem seal system and stem supported in bearings to ensure seals are free from operation loads.

Brand: Argus

Trunnion Mounted Ball Valves - FK76M

Argus FK76M trunnion mounted ball valves are engineered to deliver long-lasting, tight shut-off performance in oil and gas, petrochemical and chemical industry applications. It features a modular design that allows simplified adaptation to diverse safety, emissions and performance requirements. The FK76M ball valve is available in standard and severe service designs and offers metal-seated and soft-seated configurations for reliable sealing performance.

Brand: Argus

Trunnion Mounted Ball Valves - HK35

The Argus HK35 has all the benefits of the FK76M in a high-pressure design. It is designed to perform in severe conditions where compliance to the highest demands in tightness for leak rate and fugitive emission is mandatory. It is designed to meet API-6D, ANSI B16.34 and BS 5351.

Brand: Argus

Trunnion Mounted Ball Valves - Subsea

The Subsea Trunnion Mounted Ball Valve is a quarter-turn ball valve designed for total reliability against internal and external leaks in shallow and deep-water applications.

Brand: Valbart

Trunnion Mounted Ball Valves - Valbart Cryogenic Ball Valve

The Valbart Cryogenic Ball Valve meets demanding end-user requirements for leak rate and fugitive emission performance. It's body construction and flexible trim configurations ensure proper safe isolation. It is bi-directional (std) or uni-directional (upon request), side entry or top entry with fire-safe design, with an anti-static feature and automatic cavity relief.

Brand: Valbart

Trunnion Mounted Ball Valves - VB2 & VB3

The Valbart VB2 and VB3 are repairable, bolted body, side-entry, trunnion-mounted ball valves featuring a fixed ball and floating seat rings. They are compliant with API 6D and 6A.

Brand: Valbart

Trunnion Mounted Ball Valves - VW1

The Valbart VW1 is a API 6D-compliant, welded-body valve that seals off both seats at the same time and allows bleeding of the entrapped cavity pressure (double block and bleed) with the ball in the closed position.

Brand: Valbart