Product Search

The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where deviations to API 610 are accepted. This pump provides users with the important mechanical, hydraulic, emissions control and safety components required by the latest ISO 13709/API 610 standards.

Compliant with ISO 13709/API 610 (VS6), the WUC vertical turbine pump is a radial flow or axial flow type, multistage, heavy-duty double casing pump. It is designed for continuous unspared duty at a variety of high-pressure services, operating at temperature extremes and handling difficult liquids.

The WX pump is a horizontal, radially split, single case, multistage, ring section pump. Available in various sizes, hydraulics and material combinations, the WX is well suited for a wide range of applications. It is designed to provide reliable, efficient performance with total life cycle cost economy.

The D800 Series of pumps has evolved as Flowserve engineers have reacted to the growing need for economical pumps for general industrial service. Covering a large flow and head range, the D800 is versatile and reliable. It is available in multiple configurations to suit site requirements and incorporates many proven features to reduce and facilitate maintenance.

The Worthington DS end-suction, double volute single-stage pump with a back pullout configuration is engineered for a wide variety of industrial services.

The Flowserve DS-RO single-stage, end-suction, foot-mounted pump is engineered specifically for auxiliary applications found in reverse osmosis desalination processes. Developed in accordance with ISO 5199, this versatile pump is well-suited for plant support services such as pretreatment, boosting and product water supply. Optimized hydraulics and desalination-specific materials of construction provide high-efficiency performance and long-term reliability that result in increased uptime with low cost of ownership.

The Flowserve FRBH pump, specifically designed for the pulp and paper industry, is a single stage, radially split, end suction centrifugal pump with a semi-open overhung impeller.

The VQE is a vertical quintuplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.

The VSE is a vertical septuplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.

The VTE is a vertical triplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.

The YHT is a horizontal triplex positive displacement reciprocating pump with very high efficiency and is offered in a wide range of hydraulic, mechanical, and material options.

The LPN is a between bearing, axially split, one-stage pump. With a double suction impeller and side-side nozzles, this medium-pressure pump is a natural solution for low NPSH applications, such as water and hydrocarbon transfer service.

The LNN series of pumps is the outcome of many years of experience in the design and manufacture of axially split casing pumps. State-of-the-art pump design technology from Flowserve has resulted in superior pump designs which offer broad hydraulic coverage, quiet operation, low NPSH requirements, high operating efficiency and low total cost of ownership.

The LR family of pumps provides a broad range of hydraulic coverage and low total cost of ownership. With thousands of units installed over the years, these pumps provide reliable and efficient performance in applications ranging from water supply to circulation duties to petroleum distribution.

The M hard-metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.

MJ and MJC are vertical sump pump configurations. Designed to use M pump liquid end parts, the MJ and MJC are suitable for wet and dry pit applications and can be directly coupled or V-belt driven.

The type R rubber-lined slurry pump is a horizontal, single-stage, end suction design, with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive/abrasive mixtures.

RJ and RJC are vertical sump pump configurations. Designed to use R pump liquid end, the RJ and RJC are suitable for a broad range of wet-pit applications and may be directly coupled or V-belt driven.

The MF and MFV are rugged and efficient solids-handling pumps. These pumps are designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern. The MF pump is an end-suction, side discharge, mixed flow, non-clog pump.

The MN and MNV are rugged, large-capacity, mixed-flow, solids-handling pumps designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern. The MN pump is an end-suction, side discharge, non-clog pump.