Skip to main content

Product Search

You have filtered by:

Product Category: Seals

Brand: Flowserve
Accessories - Bearing Gard

The Bearing Gard employs static and dynamic sealing technologies to prevent ingress of contaminants into the bearing housing and ensure oil retention, even when the equipment is shut down.

To get a quote for Bearing Gard and talk to one of our representatives, please submit your information here.

Brand: Flowserve

Accessories - Bearing Gard for Steam Turbines

The Bearing Gard for steam turbines is specifically design for these unique applications creating a strong barrier to prevent steam ingress and additional oil retention features.

To get a quote for Steam Turbines and talk to one of our representatives, please submit your information here.

 

Brand: Flowserve

Accessories - Bearing Gard with Electrical Grounding

The Bearing Gard with Electrical Grounding is specifically designed for VFD driven motors to prevent failure from electrical fluting and contamination ingress.

To get a quote for the Bearing Gard with Electrical Grounding and talk to one of our representatives, please submit your information here.

Brand: Flowserve

Accessories - Cyclone Separator

Offered in several sizes to fit the application, Flowserve cyclone separators are designed to efficiently remove sand, pipe scale and other abrasive particles from Plan 31 seal flush Piping Plans. Separation is accomplished by centrifugal force generated by differential pressure across the cyclone.

Brand: Flowserve

Accessories - DuraClear Lubricants

DuraClear oils are formulated for the complex lubrication requirements demanded by mechanical seals. The performance benefits over general duty lubricants have been recognized in lab testing and proven in the field.

Brand: Flowserve

Accessories - Magnetic Separator

The Flowserve magnetic separator is designed for use inline with seal coolers used in Plan 23 Piping Plans. Magnetic separators created a magnetic field that separates and holds iron oxide particles from the process liquid to prevent them from causing abrasion, hang-up, or clogging.

Brand: Flowserve

Accessories - XLC Series Self-aligning Split Bearing

XLC self-aligning, split journal bearings are designed specifically for air cooled heat exchanger (ACHE) fans. Installed in the hot ambient temperature environment just below the fan blade hub, XLC bearings improve safety and reliability while reducing maintenance costs. The XLC bearing’s composite surface has self-lubricating properties, enabling grease-free operation throughout its life.

Brand: Flowserve

Compressor Seals and Systems - Ampliflow

The Flowserve Ampliflow helps ensure that an adequate supply of clean, filtered gas is provided to the seals during periods of low differential across the compressor.

Brand: Flowserve

Compressor Seals and Systems - Ampliflow G-Boost Seal Gas Booster

The Ampliflow G-Boost delivers a continuous supply of clean  seal gas to compressor gas seals, eliminating a source of contamination and equipment downtime. Driven by an electric motor, the Ampliflow G-Boost improves operational reliability during periods of low differential pressure across the compressor when the available seal gas supply is insufficient.

Brand: Flowserve

Compressor Seals and Systems - Ampliflow T-Boost Seal Gas Booster

The Flowserve Ampliflow T-Boost seal gas booster is an electrically driven booster that improves operational efficiency by continuously delivering clean seal gas during periods of low differential pressure. The booster combines an innovative drive system with an intelligent motor control to achieve higher energy efficiency and a mean time between repair (MTBR) of 24,000 operating hours.

Brand: Flowserve

Compressor Seals and Systems - Cleanpac

The Cleanpac line of filters includes heavy liquid removal units, hybrid coalesce / pre-filter units along with dual coalescing filter assemblies.

Brand: Flowserve

Compressor Seals and Systems - Drypac

Drypac seals will reduce the potential of liquid formation between the seal faces by lowering the dew point of the gas and raising the temperature of the seal supply gas at least 20°C (36°F) above the dew point as recommended by API standards.

Brand: Flowserve

Compressor Seals and Systems - N2 Genpac

Generates Nitrogen gas from compressed air in hazardous conditions or remote locations.

Brand: Flowserve

Gas Barrier and Containment Seals - GSDH

GSDH Series seals are metal bellows containment seals for high temperature hydrocarbons, heat transfer fluids, and other fluids pumped beyond the temperature limits of elastomers. GSDH seals are fully compliant with API 682 Type C, Arrangement 2 requirements.

Brand: Flowserve

Gas Barrier and Containment Seals - GSL

GSL Series seals are non-contacting gas seals for dry running vapor containment and full pressure wet backup sealing in light hydrocarbons, crude oil, and hazardous services. GSL seals use wave pattern technology to eliminate wear and are fully compliant with API 682 Type A, Arrangement 2 requirements.

Brand: Flowserve

Gas Barrier and Containment Seals - GTSP

GTSP seals are dual pressurized, high temperature metal bellows gas seals for the hottest process pumps found in refinery and hydrocarbon services. Utilizing Flowserve’s exclusive bi-directional wavy face topography, GTSP seals pressurized with dry steam or nitrogen are specially
engineered to drive exceptional, long-term equipment reliability and lower energy consumption.

Brand: Flowserve

Metal Bellows Seals - BRC

BRC Series edge-welded metal bellows seals are exceptionally robust and designed to seal high-temperature hydrocarbons, heat transfer fluids and severe services in refineries and hydrocarbon processing plants. The BRC series is fully compliant with API 682 Type C requirements and features thick-plate Alloy 718 bellows convolutions for superior corrosion resistance.

Brand: Flowserve

Metal Bellows Seals - BX

BX Series balanced metal bellows seals are engineered to drive exceptional, long-term equipment reliability and lower energy consumption. They provide exceptional reliability in corrosive and non-corrosive fluids, especially fluids that crystallize or coke in atmospheric conditions. The BX Series is fully compliant with API 682 Type B requirements. Available in single and dual seal configurations.

Brand: Flowserve

Metal Bellows Seals - BXRH/BXHHS

BXHHS and BXRH seals provide sealing capability at extreme temperatures in challenging refinery and petrochemical services. When pumping services push beyond temperature limits of elastomers, BXHHS and BXRH seals offer reliable sealing in both single and dual seal configurations. BXHHS and BXRH seals are fully compliant with API 682 Type C requirements.

Brand: Flowserve

Mixer Seals - ISC2-MW

Standard Dual pusher seal for mixer service.

Brand: Flowserve

pages: