The Bearing Gard employs static and dynamic sealing technologies to prevent ingress of contaminants into the bearing housing and ensure oil retention, even when the equipment is shut down.
To get a quote for Bearing Gard and talk to one of our representatives, please submit your information here.
The Bearing Gard with Electrical Grounding is specifically designed for VFD driven motors to prevent failure from electrical fluting and contamination ingress.
To get a quote for the Bearing Gard with Electrical Grounding and talk to one of our representatives, please submit your information here.
Offered in several sizes to fit the application, Flowserve cyclone separators are designed to efficiently remove sand, pipe scale and other abrasive particles from Plan 31 seal flush Piping Plans. Separation is accomplished by centrifugal force generated by differential pressure across the cyclone.
The Flowserve magnetic separator is designed for use inline with seal coolers used in Plan 23 Piping Plans. Magnetic separators created a magnetic field that separates and holds iron oxide particles from the process liquid to prevent them from causing abrasion, hang-up, or clogging.
The HWX pump is a vertical, in-line design pump fully compliant with API 610 (OH3), latest edition. This pump offers a space-saving alternative for many overhung process pumps in upstream and downstream services, low-temperature, high-temperature, and high working pressure services.
The PHL is an overhung horizontal one stage pump. Fully compliant with ISO 13709/API 610 (OH2), the PHL’s innovative multi-channel diffuser technology allows the hydraulics to be custom-tuned to ensure best efficiency hydraulic fits while maximizing parts interchangeability.
The Ampliflow G-Boost delivers a continuous supply of clean seal gas to compressor gas seals, eliminating a source of contamination and equipment downtime. Driven by an electric motor, the Ampliflow G-Boost improves operational reliability during periods of low differential pressure across the compressor when the available seal gas supply is insufficient.
A vertical dry pit pump, pre-fabricated concrete volute and suction bell; pull out design with open or closed impeller options. Perfect for intake and cooling water supply in both nuclear and thermal power stations, flood control and circulating water duties.
The CT6 is a six-chamber diaphragm pump designed for chemical transfer applications. It is a self-priming pump with wetted parts resistant to many agricultural and industrial chemicals. The CT6 is used primarily to dispense fluids from bulk or mini-bulk tanks, intermediate bulk containers (IBCs), drums, and for similar containers. The pump can be configured with a variety of brackets, dip tubes, flowmeters, fittings, hoses and valves to provide a complete pumping system.