
The PolyChem S-Series chemical process pump features a fluoropolymer-lined, conventionally sealed design and meets ASME B73.1 dimensional standards. The PFA-lined wet end provides superior corrosion resistance and temperature allowance. Incorporating the proven Mark 3 power end, the PolyChem S-Series pump is engineered to maximize performance and reliability.
Brand: Durco
Flowserve has been the sole source pump supplier for ebullated bed residue hydrocracking since 1967, with more than 80 installed pumps worldwide. The Ebullator pump is defined as critical service and is unspared, so reliability is of upmost importance. The Ebullator pump is subjected to extreme process conditions with high temperature (>400°C, 752°F), high suction pressure (>180 bar, 2610 psi), entrained gas, as well as corrosive and erosive process fluid.
Brand: Byron Jackson
The Valtek MaxFlo 4 eccentric rotary plug control valve is for applications demanding higher rangeability, precise control and higher flow capacity.
Brand: Valtek
Calder ERT energy recovery turbines are designed and manufactured specifically for reverse osmosis desalination. They can recover as much as 90% of the hydraulic energy remaining in the brine stream, converting it into rotary power for the high-pressure pumps. Highly efficient and reliable, Calder ERTs are installed in nearly 1000 seawater and brackish water reverse osmosis plants worldwide, with a total installed capacity in excess of 350 MW.
Brand: Flowserve
The unique Survivor control valve design solves the harshest erosion, corrosion and flashing applications. With a variety of ceramic trims available, no other valve will last longer - even in applications with demanding flashing and erosive particulate. The unique design of the Survivor directs flashing energy away from critical equipment. Unique packing configurations solve difficult sealing problems associated with solids entraining the process fluids.
Brand: Valtek
A large bore gate valve with body guided, split wedges, offering superior leak tightness and performance.
Brand: Edward
Compliant with ASME Section III and RCC-M design codes, Edward Equiwedge flexible split wedge gate valve is the industry standard for fast-acting, reliable isolation of main steam or main feedwater lines.
Brand: Edward
Compliant with ASME Section III and RCC-M design codes, the Edward Equiwedge flexible split wedge gate valve is the industry standard for fast-acting, reliable isolation of main steam or main feedwater lines.
Brand: Edward
The Flex Wedge valve has a single piece, optimized gate design to provide minimized seat leakage.
Brand: Anchor/Darling
The CPT Floating Control Ball Valve is a compact rotary control valve in three-piece and flanged design that offers bubble-tight shutoff and throttling control.
Brand: Worcester
The Argus™ EK71 is an end-entry ball valve for the oil and gas industry to prevent losses from production or material leakage. It is designed to meet API-6D, ANSI 16.34 and BS 5351 requirements.
Brand: Argus
The FK75C split-body, full-bore, floating ball valve represents the highest standards in valve technology. Its superfine-finished, seat-supported ball is just one of its many important design features. Others include an anti-blow out stem, long-life, double-stem seal system and stem supported in bearings to ensure seals are free from operation loads.
Brand: Argus
Argus™ FK75M is a split body ball valve for the chemical and petrochemical industries with a highly standardized design.
Brand: Argus
With many innovative design features, the Argus™ FK79 represents the highest standard in valve technology and is designed to meet API-6D, ANSI 16.34 and BS 5351 requirements.
Brand: Argus
The McCANNA Cryogenic Ball Valve is the optimum solution for cryogen flow isolation at temperatures as low as -196°C (-320°F), including LNG liquefaction, transportation and regasification. It is certified fire-safe and meets ISO 15848 standards.
Brand: McCANNA
Full Port ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
A range of 3-piece ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
Reduced / Regular Port ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range
Brand: Worcester
The Worcester C4, C44, C51 is a 3-piece and flange cryogenic ball valve specifically designed for use on liquid gases such as nitrogen and oxygen. It offers high-performance, shutoff valves for intermittent and continuous flow applications with temperatures to -425°F.
Brand: Worcester