Access a collection of product and technical literature that addresses challenges and solutions in the oil and gas, chemicals, power, water and general industries.
We want our library literature to meet your needs, so please share your candid opinions with us. We look forward to hearing from you.
Literature Number: FIS170eng
Literature Type: User Instructions and Maintenance Manuals (IOM)
Literature Number: FIS119eng
Literature Number: FIS214 rev 12/18
Description: Installation instructions for the XLC Series self-aligning split bearing. This precision radial load support device is designed specifically for air-cooled heat exchanger fans.
Literature Number: FSD173eng
Literature Type: Technical Bulletin
Description: Magnetic Separators designed for mechanical seal injection flow as well as installation in control lines and other locations. Cyclone Separators designed to remove sand, pipe scale & other abrasive particles from injection flow to mechanical seals.
Literature Number: FIS149eng
Description: Installation instructions for Seal Gard
Literature Type: Certification
Description: Bearing Gard ATEX Examination and IP Protection Certificate
Literature Number: FIS227eng
Description: Installation instructions for Flowserve Bearing Gard for Steam Turbines
Literature Number: FIS223eng
Description: Bearing Gard Installation, Operation and Maintenance Instructions
Literature Number: FIS226 rev b
Description: Installation instructions for one- and two-piece SPEx sanitary fittings.
Literature Number: FIS171eng
Description: Installation Instructions for SEB Solids Excluder Bushing. The SEB solids excluder bushing is an engineered device specifically designed to extend the mean time between failure (MTBF) of a mechanical seal. Installation according to these steps will assure long, trouble free life of the SEB bushing.
Literature Number: FIS107eng
Description: Proper installation instructions for compression packing.
Literature Number: FTA109eng
Description: The shelf life of compression packing is virtually unlimited if stored in sealed plastic bags that prevent the lubricant from vaporizing or running out. This flyer provides recommended storage procedures for compressing packings to ensure long life.
©2021 Flowserve Corporation. All rights reserved.
Terms & Conditions / Privacy / Accessibility / Site Map