Worcester 51/52 Series Flanged Ball Valve
Flowserve Worcester's Series 51/52 one piece end-entry is a standardized line of flanged ball valves offering a tight shut off and leak tight stem seals. The design also includes high cycle operation, pressure integrity, material compatibility, speed of operation and high temperature endurance.
Waste Treatment, Waste Processing, Heat Transfer Fluids, Organic Chemicals, Waste Water, Construction, High Temperature Service, Petrochemical Processing, Water, Coolants, High Viscosity Polymers, Plating, Water Cooling, Cooling Systems, Hydrogen, Process, Water Pollution, Cooling Water, Industrial Plant Services, Safety Systems, Water Treatment, Dewatering, Industrial Waste, Sewage, Difficult-to-Seal Liquids, Inorganic Chemicals, Sludge Recirculation, Acid Transfer, Drainage, Irrigation, Soap, Agriculture, Effluent, Light Oils, Solids Handling, Air Pollution, Filtration, Light Slurries, Sump Drain Off, Aromatics, Fine Chemicals, Low Pressure Safety Injection, Synthetic Fuels, CO2 Injection, Fuel, Low Shear Services, Tank Farm Transfer, Car Wash, General Processing Industry, Metal and Steel Industry, Toxic Services, Chemical Processing, General Purpose, Mineral Processing, Utility, Commercial, Greases and Fats, Mining, Valuable Liquids, Condensate, Heat Exchangers, Municipal, Condensate Cooling Water
Condensate Systems, Coatings, Cooling Water - Metals, Distillation, Fire Protection - General Industry, Ground Water Development and Irrigation, General Industries, Electronics, Logistics and Tank Farm, Miscellaneous Services, Automotive and Aircraft, Plating, Galvanizing and Other Coatings, Waste Processing, Aerospace, SAGD, Water Treatment, Agriculture, Steam Systems, Solvents, Bleach Chemicals, Utilities, Polymers, Boiler Feed, Volatile Organic Compounds, Caustic and Chlor-Alkali, Boiler Feedwater Systems, Chemical and Liquor, Construction
ASME (ANSI), ISO 9001:2000, ISO
Flowserve Worcester's Series 51/52 is a standardized line of flanged ball valves offering tight shut off and leak tight stem seals. The design provides a manually operated or automated valve which exceeds the performance requirements of your process. This includes high cycle operation, pressure integrity, material compatibility, speed of operation and high temperature endurance.
A wide variety of body, seat and seal materials coupled with advanced design technology means dependable high cycle control on steam, petroleum products, chemicals and abrasive liquids. Seat design with relief slots allow for positive down stream sealing, lower operating torques, less seat wear and longer service life.
- One piece body construction
- High Cycle stem and seat design
- Bi-directional down stream sealing
- Designed for automation
- Multiple approvals for special applications including FM, UL, API and more
- Available for advanced quarter turn control applications
- Sizes ranging from 1/2'' to 10''
- ANSI class 150/300 rated
- Materials including ductile iron, carbon steel and 316SS with a variety of available trim materials
- Certifications for vacuum
- UL approved
- Oxygen service and other applications
- Fire rated to API 607 4th Ed-BS 5351-FM 7440
Showing all languages below...
Worcester Controls 51/52 Series Flanged Ball Valve brochure: Standard and Anti-Static Valves in ANSI Class 150 and 300
Worcester Controls 51/52 Series 1/2"-2" Flanged Ball Valve User Instrucitons: Installation, Operation and Maintenance Manual (IOM)
Worcester Controls 51/52 Series Flanged Ball Valve; 4 Series High Pressure Valve User Instructions: Installation, Operation and Maintenance Manual (IOM)
Learn how Tantaline® brand tantalum survace alloy coating for Flowserve products can reduce cost in higly corrosive applications.
Worcester Controls Fire-Rated Ball Valves brochure: Meets EXES 3-14-1-2A, API 607 Edition 3 and 4, Factory Mutual FM 7440 and British Standards
Worcester Controls Factory Mutual Approved 51/52 Series Fire-Safe Valves User Instructions: Installation, Operation and Maintenance Manual (IOM)
Worcester Controls 51/52 Series Flanged Ball Valve Engineering Data and Valve Dimensions Specification Sheet
Worcester Controls 51/52 Series Flanged Ball Valve Engineering Data and Valve Dimensions specification sheet
|Description:||The Worcester Series 94 valve sets a new performance standard for both cycle life and leak tightness in all valves. The special dual stem packing design incorporates a primary cup and cone design packing and backed with a chevron style secon|
|Description:||The Worcester AF/FZ Fire rated valves are the solution to applications where operational integrity must be maintained before, during and after a fire. Worcester Fire Rated valves assure tight shut off and prevent external leakage in the tremendo|
|Description:||Worcester Series 818/828 flanged full port valves are designed to meet recognized industry standards in a wide variety of industries including chemical processing, petrochemical, oil and gas production, pulp and paper and many others. Desig|
|Description:||The Worcester Series 44 three-piece Ball Valves are designed to ANSI B16.34 specifications with advanced seal technology. A body mounted bracket design provides superior performance and in-line repairability.|
|Description:||The Worcester Series 59 Ball Valve offers a Full Port option to the standard Series 44 Ball Valve. Full port capability is advantageous in applications where fluid velocity is a concern, such as slurries, viscous fluids and fluids with particulates. Designed to ASME B16.34 ratings and with advanced seal technology, you are assured of maxium performance and life.|
|Description:||Flowserve Worcester's Series 51/52 one piece end-entry is a standardized line of flanged ball valves offering a tight shut off and leak tight stem seals. The design also includes high cycle operation, pressure integrity, material compatibility, speed of operation and high temperature endurance.|
|Description:||Worcester Controls Series 45 ball valves provide the best performance for the installed cost in the 2 1/2"-6" size range, for OEM equipment and packaged piping systems, . Flanges are an integral part of the valve design, providing savings in flanges, nuts, bolts and labor.|
|Description:||Flowserve Worcester Series 82/83 flanged full port valves are designed to meet recognized industry standards in a wide variety of industries including chemical processing, petrochemical, oil and gas production, pulp and paper and many others.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.