- Booster Pump Recirculation/Isolation
- Bypass Spraywater Control/Isolation/Bypass
- Condensate Pump Isolation
- Condensate Pump Recirculation
- De-aerator Pegging Control/Isolation
- Economizer Drain
- Emergency Heater Drain
- Feedwater Control Isolation and Bypass
- Feedpump Recirculation/Isolation
- Heater Level Control
- Heater Steam Control/Isolation
- Main Feed Stop/Check
- Main Steam to Aux Steam Bypass
- Primary Superheater Bypass
- Reheat Attemperator Spray/Isolation/Bypass
- Reheater Drain
- Superheat Attemperator Spray/Isolation/Bypass
- Superheater Drain
Valtek Mark One Linear Control Valve
The Valtek Mark One globe control valve offers superior performance in liquid and gaseous services, while also permitting easy, fast and inexpensive maintenance.
Flowserve, Valtek, Valtek EMA
CO2 Injection, Condensate, High Temperature Service, Hydrocarbon Processing, Cryogenic Service, Petroleum Production and Refining, Chemical Processing, Corrosive Services, Water, Petrochemical Processing
Nuclear Power, Chemical Processing, Oil and Gas, Slurry Processing, Gas-to-Liquids, LNG, OEM, Power Generation
ISO 9001:2000, ISO, AMSE (ANSI), Nuclear
The Valtek Mark One control valve is a broad range control valve including globe, angle and 3-way body types. It is designed to handle a wide selection of process control applications for flow, pressure and temperature including corrosive fluids, cryogenic, steam, water, gases, multi-phase, high temperatures, erosion and high pressure drops. The Mark One ranges in sizes from ½” to 36” and in pressure classes from class 150 to 4500 and is used for either throttling or on-off control.
The spring-cylinder actuated Mark One valve provides stiffness and maintains high positioning accuracy, repeatability, controlled high speed, and faithful response. The Mark One valve pneumatic actuator handles up to 150 psig (10.3 barg) supply air and has the thrust to shut off against much higher fluid pressures.
The Mark One valve is designed so the spring, supply air pressure and fluid pressure itself combine to produce exceptionally tight shutoff. A self-aligning seat ring further enhances the shutoff capability of the Mark One valve.
The Mark One valve is typically double top-stem guided and completely avoids contact between the plug and seat retainer. Many globe valve maintenance problems can be traced to cage-guiding. The close metal-to-metal contact between the cage and plug often results in galling and sticking.
The clamped-in seat and top-entry trim permits easy, quick maintenance. Plus, with the Mark One valve's high degree of parts interchangeability, fewer inventory parts are required. In addition, the actuator is lighter, smaller and easier to handle than comparable diaphragm actuators.
The Valtek Mark One control valve is the industry choice for a simple, reliable, tough globe valve.
Features and Benefits:
- High interchangeability between sizes and other Valtek products
- Globe, angle, three-way, and steam-jacket body styles
- Double-stem guiding located outside the flow stream
- Top-entry servicing
- Clamped-in, self-aligning seat ring for easy removal
- Small, compact, light-weight body and actuator package
- Stiff and high-thrust cylinder actuator
- Anti-cavitation and noise abatement trim
- Accurate positioning and high repeatability coupled with faithful response
Showing all languages below...
Valtek Mark One and Mark Two Control Valves User Instructions: Installation, Operation and Maintenance Manual (IOM)
This technical brochure provides technical details on the application and use of the Valtek Guardian II Metal Bellows Seal Control Valve.
Valtek Mark One Three-way Control Valve User Instructions: Installation, Operation and Maintenance Manual (IOM)
Valtek Mark One Control Valve cut-away poster
Valtek Spring Cylinder Linear Actuator SIL certificate
Flowserve's engineered solutions maintain durability and precision in the often harsh environments and process conditions of CSP generation, utilizing designs that minimize leaks, function at extreme temperatures, and resist corrosion and abrasion.
This technical brochure contains technical details on the application and use of the Valtek Mark One Control Valve.
Valtek Standard and Environmental Packing Systems technical brochure
Logix 3200MD Digital Positioner SIL certificate
Valtek Mark One Three-Way Control Valve SIL certificate
Valtek Survivor Control Valve SIL certificate
Valtek Mark Six Cryogenic Control Valve SIL certificate
Valtek Mark One Control Valve SIL certificate
Valtek GOST R Сертификат Соответствия
This technical brochure provides technical details on the application and use of the Valtek Mark One Sanitary Trim.
This Safety Manual provides information necessary to design, install, verify and maintain a Safety Instrumented Function (SIF) utilizing a Flowserve Valtek Mark Series Valve and Cylinder Actuator. This manual provides necessary requirements for meeting the IEC 61508 or IEC 61511 functional safety standards.
Valtek SafeGuard and SureGuard Fugitive Emissions Packing User Instructions: Installation, Operation and Maintenance Manual (IOM)
|Description:||The Valbart Trunnion-Mounted Control Ball Valve, TMCBV, is available in all styles of side-entry and top-entry trunnion ball valves.|
|Description:||The Valtek Mark 100 control valve is a large control valve designed to have the features needed by large applications. The Mark 100 globe control offers the highest flow capacity, as well as fast, easy maintenance in both gas and liquid control. The|
|Description:||The Logix 3200 Series of Digital HART positioners utilize state-of-the-art piezo technology to provide superior performance and reliability. The Logix 3200 series can be easily configured using the local buttons, HART handheld, and ValveSight software.|
|Description:||The Flowserve FlowTop control valve is a high-performance, general application valve coupled with the high-thrust FlowAct pneumatic diaphragm actuator. The modular design allows by using the same body with different types of bonnets, trims and actu|
|Description:||ChannelStream trim prevents cavitation from forming and minimizes hydrodynamic noise even under the most severe liquid applications. This unique design not only eliminates cavitation damage, but also provides easy maintenance and long life, even|
|Description:||CavControl trim is a cost-effective trim that effectively minimizes cavitation damage to valve components by controlling the location and concentration of cavitation vapor bubble implosion in an area away from metal parts.|
|Description:||The Valtek Valdisk™ is a heavy-duty, double offset butterfly valve used whenever high capacity is needed with the lowest possible pressure loss. Available in pressure classes 150-2500 in carbon steel and stainless steel as standard materials with a wide variety of alloys as options.|
|Description:||The Flowserve Valtek Mark Six is a globe-style, single-seat, top-entry automatic control valve with a fabricated extension for cold box cryogenic applications to -425°F /-218°C. Mark Six bodies are constructed of bronze or austenitic stainless s|
|Description:||MegaStream trim effectively reduces control valve noise in a range of gas applications. MegaStream trim is available in two styles: a very economical, interchangeable one-or two-stage design for noise reduction up to 15 dBA, and a highly effective multi-s|
|Description:||The Flowserve Valtek MaxFlo 3 control valve is a high performance eccentric rotary plug valve designed for the process industry. It features a large capacity, standard hardened trim and superior shaft blow-out protection. This valve is available in sizes 1 through 12 inches, ANSI Class 150 through 600 as well as DIN PN16, PN40 and PN63.|
|Description:||When installed in a globe style control valve, TigerTooth trim effectively reduces sound pressure levels up to 30 dBA. TigerTooth trim can also be used to eliminate the damaging effects of cavitation making it an effective choice for either gas or liquid|
|Description:||Stealth is a technically advanced gaseous noise reduction design for the most demanding services.|
|Description:||The StarPac 3 can stand alone or be integrated into a system, and is available for a variety of applications including oil and gas, chemical, paper, mining, industrial gases and power generation.|
|Description:||The Valtek ShearStream™ is a segmented, ball control valve that provides exceptional control and rangeability for the process industries. Available Flanged or Flangeless, 1" to 20", in ANSI classes 150-600, in stainless steel, carbon steel or other castable alloys.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.