Click to enlarge
1 image available

The BK 28 is designed for high pressure drip applications including: steam main drip, turbine drain, etc. Excellent for superheated steam drip applications.
Features and Benefits
• Forged alloy steel body with thick Titanium Body Shield to resist flashing damage.
• Titanium alloy valve and seat.
• Pressure assisted “fail open-only” design.
• Standard factory setting discharges hot condensate in a modulating fashion at approximately 18°F (10°C) below saturation temperatures throughout its operating range.
• One internal bimetallic regulator for all applicable body pressure ranges. Single replacement part.
• Staged “control valve-style” nozzle reduces wiredrawing damage by reducing flashing. Totally unaffected by water hammer.
• Self draining – will not freeze when installed in gravity drainage position. Can be installed in any position.
• Automatically vents air and non-condensable gases and has a very high (7:1) cold water capacity for rapid start-up.
• Operates with zero steam loss throughout its operating range saving steam and money during the life of the trap.
• Easy in-line inspection and maintenance – no need to remove the trap from the piping to clean or replace the internals.
• Internal stainless steel strainer.
• Integral check valve design.
• Two (2) year guarantee.
Materials
• Body and Cover – ASTM-A182 F12
• Body Insert – Titanium
• Cover Bolts – ASTM A193 B7 (DIN 1.7258)
• Bimetallic Regulator – SST Steels and Titanium
• Other Internals – Stainless Steel

How to Order
Specify trap, end connection size and type.
For Example: BK 28 1/2" SW

Showing all languages below...

BK28 and BK29 Steam Traps

Värmebehandlingen skall utföras med motståndsglödgning. Vid gasglödgning måste regulatorn demonteras innan glödgningen påbörjas.

Betriebsanleitung 803738-02 Kondensatableiter BK 37, BK 28, BK 29, BK 37 ASME, BK 28 ASME, BK 29 ASM

Die Kondensatableiter BK 37..., BK 28... und BK 29... nur zur Abführung von Kondensat aus Wasserdampf oder als Dampfentlüfter einsetzen. Einsatz in Rohrleitungen zum Ableiten von Kondensat aus Wasserdampf innerhalb der zulässigen Druck und Temperaturgrenzen unter Beachtung der chemischen und korrosiven Einflüsse auf das Druckgerät.

Kondenspotte BK 37, BK 28, BK 29 BK 37 ASME, BK 28 ASME, BK 29 ASM

Benytt kondenpotter BK 37..., BK 28... og BK 29... kun for å drenere kondensert vann eller for utlufting av dampledninger innenfor de tillatte trykk- og temperaturbegrensninger. Kontroller korrosjons- og kjemisk bestandighet for dette trykkproduktet mot applikasjonen.

Scaricatori di condensa BK 37, BK 28, BK 29 BK 37 ASME, BK 28 ASME, BK 29 ASME

Usare gli scaricatori di condensa BK 37…, BK 28… e BK 29… solo per scaricare condense o aria proveniente da linee vapore solo entro i valori pressione/temperatura ammessi. Verificare inoltre le compatibilità alla corrosione ed agli agenti chimici nelle singole applicazioni.

BK 37, BK 28, BK 29, BK 37 ASME, BK 28 ASME, BK 29 ASME

De condenspotten BK 37..., BK 28... en BK 29... alleen voor de afvoer van condensaat uit stoom of als ontluchter van stoomsystemen toepassen. Toepassing in leidingen voor het afvoeren van condensaat uit stoom binnen de toegestane druk- en temperatuurgrenzen rekening houdend met de chemische en corrosieve invloeden op het drukapparaat.

BK37, BK28 and BK29 Purgeurs

Purgeurs thermostatiques/thermodynamiques avec régulateur Thermovit, résistant à la corrosion et insensible aux coups de bélier

BK37, BK28, BK29, BK37ASME, BK28ASME and BK29ASME Kondensomat

Thermischer Kondensatableiter mit korrosionsbeständigem, wasserschlagunempfindlichem Thermovit®Regler (DuostahlRegler). Mit innenliegendem Schmutzfänger und integrierter Rückschlagsicherung. Asbestfreie Gehäusedichtung (Graphit/CrNi). Einbau in jeder Lage.