RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump
The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.
Haga clic para agrandar la imagen
1 image available
- Marcas:
Worthington - Aplicaciones:
Water Treatment, Wet Pit, Sump Service, Dry Pit, Pulp and Paper, Mineral Processing, Mining, Slurries - Industrias:
Scale Recycle, Water Treatment, Water Supply and Distribution, Slurry Transfer, Wastewater Collection and Treatment - Normas:
- Misceláneo:
Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts.
Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation.
Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections.
Cast Iron Lower Bearing Housing is fitted with a rubber or urethane fluted bearing, which is contained in a rigid stainless steel shell and lubricated from an external clear liquid source.
Features:
- Interchangeability of parts among R pump and M pump
- Concentric casing design
- Directly coupled or V-belt driven
- Acid resistant stuffing box kits
- Options
- Hard metal expeller
- Mechanical seal housing
- Acid resistant stuffing box kits
- Open and recessed impellers
- Choice of liner materials
- Natural Rubber
- Neoprene
- Hypalon
- Nitrile
- Chlorobutyl
- Urethane
- Ceramic
- Operating parameters
- Pressures to 10 bar (150 psi)
- Temperatures to 110°C (225°F) depending on material
- Solids from 2% to 70% by weight
- Specific gravities from 1.0 to 2.7
- Speeds to 1780 rpm
Showing all languages below...
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
RTN-R Certificate Brantford
RTN-R Brantford Pump type: FRBH, FRBHX, FRBHS, M, R, RX, FRBHJ, MJ, MJC, RJ, RJC, FRBHJC, MP1, MPP, TSP, NA, NC, ND, NE, NF, NG, NH, NI, NJ, NL, NM, NP18424, NFX, NLX, NIM NII, NIJ, Gearex, GR
Mark 3 ASME Standard Overhung Chemical Process Pump
| Descripción: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
PolyChem VGRP Engineered Polymer Composite Overhung Sump Pump
| Descripción: | The PolyChem VGRP pump is a fiberglass, vertical immersion, open impeller type pump designed for corrosive wet pit applications in waste handling and chemical transfer. The PolyChem VGRP is available in seven sizes, with single-piece columns in 3 ft to 18 ft lengths. |
|---|
Terra-Titan™ Cantilever Vertical Sump Pump
| Descripción: | The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries. |
|---|
MJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump
| Descripción: | The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications. |
|---|
FRBH Heavy-Duty Paper Stock and Process Overhung Slurry and Solids Handling Pump
| Descripción: | The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership. |
|---|
RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump
| Descripción: | The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications. |
|---|
M Hard Metal, Overhung Abrasive Slurry Pump
| Descripción: | The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension. |
|---|
FRBHJC Overhung Cantilever Sump Pump
| Descripción: | The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as numerous other industries, particularly when flushing liquids are not available or cannot be tolerated. |
|---|
R Radially Split, Rubber Lined Overhung Slurry Pump
| Descripción: | The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries. |
|---|
¿Listo para comprar?
1. Encuentre su contacto de ventas de Flowserve más cercano al utilizar nuestro localizador de contactos de ventas global.
2. Llame o envíe un correo electrónico al contacto de ventas de Flowserve para informarle acerca de la información solicitada.
¿Sigue buscando información?
Para conocer más acerca de los productos de Flowserve, subscríbase a nuestro boletín informativo por correo electrónico.
