RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump

The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.

Haga clic para agrandar la imagen
1 image available

  • Marcas:
    Worthington
  • Aplicaciones:
    Dry Pit, Mining, Mineral Processing, Sump Service, Pulp and Paper, Wet Pit
  • Industrias:
    Leaching Acid, Primary Processing, Slurry Processing, Slurry Transfer, Heavy Oil and Upgrading
  • Normas:
  • Misceláneo:

Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts.

Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation.

Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections.

Features:

  • Interchangeability of parts among R pump and M pump
  • Concentric casing design
  • Directly coupled or V-belt driven
  • Acid resistant stuffing box kits
  • Options
    • Hard metal expeller
    • Mechanical seal housing
    • Open and recessed impellers
  • Choice of liner materials
    • Natural Rubber
    • Neoprene
    • Hypalon
    • Nitrile
    • Chlorobutyl
    • Urethane
    • Ceramic
  • Operating parameters
    • Flows to 225 m3/h (1000 gpm)
    • Heads to 30 m (100 ft)
    • Pressures to 10 bar (150 psi)
    • Temperatures to 110°C (225°F), depending on material
    • Solids from 2% to 70% by weight
    • Specific gravities from 1.0 to 2.7
    • Speeds to 1780 rpm

Show/hide all languages

Showing all languages below...

Bomba Tipo R

Flowserve Tipo R - Bomba recubierta de goma para lodos

Bomba Tipo R

Flowserve Bomba Tipo R - Revestida de Borracha para Pastas Fluidas

Pulp and Paper Pumps

Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services

RTN-R Certificate Brantford

RTN-R Brantford Pump type: FRBH, FRBHX, FRBHS, M, R, RX, FRBHJ, MJ, MJC, RJ, RJC, FRBHJC, MP1, MPP, TSP, NA, NC, ND, NE, NF, NG, NH, NI, NJ, NL, NM, NP18424, NFX, NLX, NIM NII, NIJ, Gearex, GR

Pumping Solutions for Sump Applications

Flowserve Pumping Solutions for Sump Applications

Type R Rubber-Lined Slurry Pump Product Bulletin

Flowserve Type R Rubber-Lined Slurry Pump

Terra-Titan™ Cantilever Vertical Sump Pump

Descripción: The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.

RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump

Descripción: The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.

MJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump

Descripción: The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.

M Hard Metal, Overhung Abrasive Slurry Pump

Descripción: The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.

R Radially Split, Rubber Lined Overhung Slurry Pump

Descripción: The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries.

¿Listo para comprar?

1. Encuentre su contacto de ventas de Flowserve más cercano al utilizar nuestro localizador de contactos de ventas global.

2. Llame o envíe un correo electrónico al contacto de ventas de Flowserve para informarle acerca de la información solicitada.

¿Sigue buscando información?

Para conocer más acerca de los productos de Flowserve, subscríbase a nuestro boletín informativo por correo electrónico.

  
Ask a Question

* Campos solicitados












* Seleccione la opción más apropiada para su caso: