Búsqueda de productos
MJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump
The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.
Sump Service, Slurries, Pulp and Paper, Wet Pit, Mining, Dry Pit, Mineral Processing
Wastewater Collection and Treatment, Water Treatment, Slurry Transfer, Slurry Processing
Hard Metal Casing made from abrasion and corrosion resistant high chrome iron incorporates integrally cast straightening vanes in the suction nozzle to reduce pipe swirl and extend impeller life.
Closed Impeller includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation as well as balance axial hydraulic loads.
Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections. Optional 316 SS, Alloy 20 or Alloy C-276 materials.
- Interchangeability of parts among R pump and M pump
- Concentric casing design
- Directly coupled or V-belt driven
- Acid resistant stuffing box kits
- Hard metal expeller
- Mechanical seal housing
- Open and recessed impellers
- Operating parameters
- Flows to 225 m3/h (1000 gpm)
- Heads to 30 m (100 ft)
- Pressures to 10 bar (150 psi)
- Temperatures to 110°C (225°F) depending on material
- Solids from 2% to 70% by weight
- Specific gravities from 1.0 to 2.7
- Speeds to 1780 rpm
Showing all languages below...
Flowserve Tipo M - Bomba de Pasta Fluida Abrasiva em Metal Duro
Tipo M - Bomba de metal endurecido para lodos abrasivos
Flowserve Pumping Solutions for Sump Applications
Flowserve Type M Hard Metal Abrasive Slurry Pump
RTN-R Brantford Pump type: FRBH, FRBHX, FRBHS, M, R, RX, FRBHJ, MJ, MJC, RJ, RJC, FRBHJC, MP1, MPP, TSP, NA, NC, ND, NE, NF, NG, NH, NI, NJ, NL, NM, NP18424, NFX, NLX, NIM NII, NIJ, Gearex, GR
|Descripción:||The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications.|
|Descripción:||The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.|
|Descripción:||The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.|
|Descripción:||The PolyChem VGRP pump is a fiberglass, vertical immersion, open impeller type pump designed for corrosive wet pit applications in waste handling and chemical transfer. The PolyChem VGRP is available in seven sizes, with single-piece columns in 3 ft to 18 ft lengths.|
|Descripción:||The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries.|
|Descripción:||The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM).|
|Descripción:||The FRBHJC is a true stiff-shaft vertical cantilever design developed to handle the thick, pulpy mixtures found in the pulp and paper industry, as well as numerous other industries, particularly when flushing liquids are not available or cannot be tolerated.|
|Descripción:||The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership.|
|Descripción:||The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.|
|Descripción:||The LC chemical slurry pump is a horizontal, frame mounted, single stage, end suction design with a tangential discharge nozzle. It is engineered to withstand the rigor of applications that are both abrasive and corrosive.|
¿Listo para comprar?
1. Encuentre su contacto de ventas de Flowserve más cercano al utilizar nuestro localizador de contactos de ventas global.
2. Llame o envíe un correo electrónico al contacto de ventas de Flowserve para informarle acerca de la información solicitada.
¿Sigue buscando información?
Para conocer más acerca de los productos de Flowserve, subscríbase a nuestro boletín informativo por correo electrónico.