Waste Processing
CPXR Recessed Impeller ISO Chemical Process Pump
| Marca | IDP |
|---|---|
| Descripción | The Durco CPXR Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or… |
Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact,… |
Durco Mark 3 ISO Overhung, Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical… |
Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy… |
Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw… |
ERPN Overhung Centerline Mounted API Process Pump
| Marca | Worthington |
|---|---|
| Descripción | The ERPN is the pump of choice for severe chemical, petrochemical, refining and heavy-duty industrial service where full… |
IPS APEX™
| Marca | Flowserve |
|---|---|
| Descripción | IPS APEX is the industry's most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX… |
IPS Power Monitor™
| Marca | Flowserve |
|---|---|
| Descripción | The IPS Power Monitor (model KW941) monitors and displays actual power to the rotating equipment. The IPS Power Monitor is… |
IPS Tempo™
| Marca | Flowserve |
|---|---|
| Descripción | The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control… |
MF Overhung Solids Handling Pump
| Marca | Worthington |
|---|---|
| Descripción | The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability,… |
MN Large Capacity, Solids Handling Pump
| Marca | Worthington |
|---|---|
| Descripción | The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically… |
MVE End Suction, Overhung Industrial Process Pump
| Marca | TKL |
|---|---|
| Descripción | The MVE mixed flow, single stage volute pump is designed to deliver high volume flow at low to medium heads. It provides… |
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ASME Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional… |
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ISO Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Flowserve PolyChem M-Series ISO pumps are non-metallic, magnetic drive pumps designed to meet ISO 2858 dimensional standards.… |
PolyChem S-Series Fluoropolymer Lined Overhung ASME Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Flowserve PolyChem S-Series ASME pumps are non-metallic, conventionally sealed pumps designed to meet ASME B73.1 dimensional… |
PolyChem S-Series Fluoropolymer Lined Overhung ISO Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Flowserve PolyChem S-Series ISO pumps are non-metallic, conventionally sealed pumps designed to meet ISO 2858 dimensional… |
R Radially Split, Rubber Lined Overhung Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle.… |
Bomba rotativa de engranaje temporizado, de tornillo doble Sier-Bath
| Marca | Sier-Bath Rotary, IDP |
|---|---|
| Descripción | La bomba rotativa de tornillo doble, temporizada, de desplazamiento positivo Sier-Bath es la más versátil de todas las bombas… |
MVX Solids Handling, Wet Pit
| Marca | Flowserve |
|---|---|
| Descripción | The Flowserve MVX is a rugged wet pit pump designed for use in solids handling applications and other wet pit services. Built… |
PolyChem VGRP Engineered Polymer Composite Overhung Sump Pump
| Marca | Durco |
|---|---|
| Descripción | The PolyChem VGRP pump is a fiberglass, vertical immersion, open impeller type pump designed for corrosive wet pit applications… |
VSMP Overhung, Vertical Cantilever, Immersion Pump
| Marca | |
|---|---|
| Descripción | The VSMP vertical standard motor pump is a vertical immersion centrifugal pump designed for general industry use. |
RJ Overhung, Vertical Lineshaft, Rubber Lined Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and… |
M Hard Metal, Overhung Abrasive Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge… |
RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing… |
CPX ISO Overhung, Single Stage Process Pump
| Marca | IDP |
|---|---|
| Descripción | Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the CPX chemical process… |
Mark 3 ASME Standard Overhung Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers… |
CPXP Self-Priming ISO Chemical Process Pump
| Marca | IDP |
|---|---|
| Descripción | Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation… |
MJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing… |
Mark 3 Recessed Impeller, Overhung Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex… |
MJ Overhung, Vertical Lineshaft, Hard Metal Slurry Pump
| Marca | Worthington |
|---|---|
| Descripción | The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and… |
PolyChem GRP Engineered Polymer Composite Overhung Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The PolyChem GRP pump is a single stage, end suction, centrifugal pump designed to ANSI/ASME B73.5 M Standards. With corrosion… |
Mark 3 In-Line Overhung Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading… |
CPXM ISO Overhung, Close Coupled, Process Pump
| Marca | IDP |
|---|---|
| Descripción | Offering state-of-the-art hydraulics and a compact, space saving arrangement, the CPXM pump is designed for applications… |
FRBHJ Overhung, Vertical Lineshaft Sump Pump
| Marca | Worthington |
|---|---|
| Descripción | The FRBHJ vertical lineshaft sump pump is suitable for to handle the thick, pulpy mixtures found in the pulp and paper industry,… |
MSX Overhung, Solids Handling, Submersible Pump
| Marca | IDP |
|---|---|
| Descripción | The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging… |
Mark 3 Unitized Self-Primer
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources… |
