MN Large Capacity, Solids Handling Pump
The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.
Haga clic para agrandar la imagen
1 image available
- Marcas:
Worthington - Aplicaciones:
Tratamiento del agua, Desulfuración de gas de combustión, Ground Water Development and Irrigation, Digester, Shipping, Tratamiento de la basura, Sewage Collection and Treatment - Industrias:
Chemical Processing, Industrias generales, Water Resources, Pulp and Paper, Power Generation - Normas:
- Misceláneo:
Flexible Design includes horizontal and vertical models, a variety of nozzle position options, and direct or independent motor mounting.
Minimal Shaft Deflection, with oversized shaft and reduced overhang, eliminates shaft failure, and increases packing and seal life.
Hardened Chrome Steel wear rings and shaft sleeve extend pump life.
Stuffing Box readily accommodates packing or mechanical seals, per customer preference.
Adjustable Wear Ring Clearance ensures continued efficient operation.
Features:
- Shaft sleeve options
- 316 stainless steel
- Hardened chrome steel
- Bearing housing features
- Tapered roller bearings
- Integral jacking bolts for wear ring adjustment
- Accessible lubrication points
- Configurations
- MN (horizontal, end suction)
- MNF (vertical, bottom suction, direct connected motor)
- MNZ (vertical, bottom suction, motor on separate floor)
- MNC (vertical with base elbow, direct connected motor)
- MNV (vertical with base elbow, motor on separate floor)
Operating Parameters
- Flows to 45 500 m3/h (200 000 gpm)
- Heads to 90 m (300 ft)
- Sizes to 1800 mm (72 in)
MN Solids Handling, Large Capacity, Overhung Impeller Chart
MN Solids Handling, Large Capacity, Overhung Impeller App
Showing all languages below...
Risorse Idriche
Flowserve Risorse Idriche: Presa e Movimentazione delle Acque; Trattamento e Trasferimento; Acque di Rifiuto; Irrigazione; Controllo Inondazioni, Bacini di Carenaggio e Drenaggio
Le pompage de l’eau
Flowserve Le pompage de l’eau Captage et adduction d’eau, Traitement et transport de l’eau, Eaux usées, Irrigation, Maîtrise des crues et drainage
Recursos hidráulicos
Flowserve Recursos hidráulicos: Captación y conducción de agua; Tratamiento y distribución; Aguas residuales; Riego; Control de inundaciones, diques secos y drenaje
Snabdijevanje vodom
Flowserve Snabdijevanje vodom - Izvori i prijenos vode Prerada i distribucija - otpadne vode - navodnjavanje Kontrola poplava, suhi dokovi i odvodnja
Wasserversorgung
Flowserve Wasserversorgung Wassergewinnung und Wasserversorgung, Aufbereitungs- und Verteileranlagen, Abwasser, Bewässerungsanlagen, Hochwasserschutz, Trockendocks, Entwässerung
Water Resources Pumps
Flowserve Water Resources: Source Water and Water Transmission; Treatment and Distribution; Waste Water; Irrigation; Flood Control, Dry Docks and Drainage
Pull-Out Assemblies for End-Suction Municipal Water and Waste Water Pumps Bulletin
Pull-Out Assemblies for End Suction Municipal Water and Waste Water Pumps (MN, MF, MC, MS)
MF and MN Pumps Poster
Flowserve MF and MN Pumps - MF Solids-Handling Pumps and MN Large Capacity, Solids-Handling Pumps
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Recursos hidráulicos
Flowserve Recursos hidráulicos: Captación y conducción de agua; Tratamiento y distribución; Aguas residuales; Riego; Control de inundaciones, diques secos y drenaje
MN (Horizontal close-coupled) Centrifugal Pumps User Instructions
Flowserve MN Horizontal, Close Coupled Centrifugal Pumps - User Instructions: Installation, Operation, Maintenance
MF Overhung Solids Handling Pump
| Descripción: | The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern. |
|---|
R Radially Split, Rubber Lined Overhung Slurry Pump
| Descripción: | The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries. |
|---|
MPT Self-Priming, Overhung, Solids Handling Pump
| Descripción: | The Flowserve MPT is a self-priming, solids handling pump designed to provide reliable, peak performance and low cost in demanding services containing suspended solids. The MPT deftly handles dirty, gritty water as well as free-flowing slurries, sewage, sewage sludge and many trade effluents. |
|---|
MSX Overhung, Solids Handling, Submersible Pump
| Descripción: | The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging environments, from pumping raw sewage to moving industrial wastewater and solids-laden liquids. |
|---|
¿Listo para comprar?
1. Encuentre su contacto de ventas de Flowserve más cercano al utilizar nuestro localizador de contactos de ventas global.
2. Llame o envíe un correo electrónico al contacto de ventas de Flowserve para informarle acerca de la información solicitada.
¿Sigue buscando información?
Para conocer más acerca de los productos de Flowserve, subscríbase a nuestro boletín informativo por correo electrónico.
