RJC Overhung, Vertical Cantilever, Rubber Lined Slurry Pump
The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.
Dry Pit, Mining, Mineral Processing, Sump Service, Pulp and Paper, Wet Pit
Leaching Acid, Primary Processing, Slurry Processing, Slurry Transfer, Heavy Oil and Upgrading
Casing halves are cast iron fitted with replaceable, abrasion resistant rubber liners, which are pressure molded to steel backing plates and secured to casing externally by heavy-duty studs and nuts.
Rubber Closed Impeller is pressure molded to ductile iron skeleton and includes pump-out vanes on front and rear shroud to reduce stuffing box pressure and suction recirculation.
Standard Packing Type Stuffing Box is protected by replaceable wear plate and is drilled and tapped for L5 and 2L3 lantern ring positions. Provided with full and low flow flush connections.
- Interchangeability of parts among R pump and M pump
- Concentric casing design
- Directly coupled or V-belt driven
- Acid resistant stuffing box kits
- Hard metal expeller
- Mechanical seal housing
- Open and recessed impellers
- Choice of liner materials
- Natural Rubber
- Operating parameters
- Flows to 225 m3/h (1000 gpm)
- Heads to 30 m (100 ft)
- Pressures to 10 bar (150 psi)
- Temperatures to 110°C (225°F), depending on material
- Solids from 2% to 70% by weight
- Specific gravities from 1.0 to 2.7
- Speeds to 1780 rpm
Showing all languages below...
Flowserve Tipo R - Bomba recubierta de goma para lodos
Flowserve Bomba Tipo R - Revestida de Borracha para Pastas Fluidas
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
RTN-R Brantford Pump type: FRBH, FRBHX, FRBHS, M, R, RX, FRBHJ, MJ, MJC, RJ, RJC, FRBHJC, MP1, MPP, TSP, NA, NC, ND, NE, NF, NG, NH, NI, NJ, NL, NM, NP18424, NFX, NLX, NIM NII, NIJ, Gearex, GR
Flowserve Pumping Solutions for Sump Applications
Flowserve Type R Rubber-Lined Slurry Pump
|Description:||The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.|
|Description:||The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.|
|Description:||The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.|
|Description:||The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.|
|Description:||The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.