DVSR Radially Split, Volute Casing, Single Stage Pump
Compliant with the latest edition of ISO 13709/API 610 (BB2), the DVSR is a radially split version of the popular DVSH pump. The radially split design of DVSR is preferred for applications at very high pressures or low specific gravity, such as liquefied gases including CO2.
Auxiliary (chemical), Renewable Fuel Production, Crude, Product and CO2 Pipeline
Oil and Gas, Chemical Processing
Double Volute Design minimizes hydraulic radial forces in any condition down to the minimum flow.
Double Suction Impeller provides hydraulic axial balance and allows minimal NPSHr.
ISO 21049/API 682 Seal Chambers ensure ample flow around the seal faces and accommodate numerous seal designs.
Heavy-Duty Shaft Design ensures trouble-free operation below the first critical speed.
- Flows to 3635 m3/h (16 000 gpm)
- Heads to 250 m (820 ft)
- Pressures to 260 bar (3750 psi)
- Temperatures to 200°C (400°F)
- Speeds to 4000 rpm
Showing all languages below...
فلوسيرف مضخات النفط والغاز - التنقيب والإنتاج وخطوط الأنابيب - البحرية - البرية - الاصطناعية الخام والغاز الطبيعي المسال
Flowserve Öl & Gas: Produktion, Pipeline - Offshore, Onshore, Synthetisches Rohöl, Flüssignaturgas
Flowserve Petrolio e gas: Esplorazione e produzione, Oleodotti - Offshore, Onshore, Greggio sintetico, Gas naturale liquefatto
Flowserve Petróleo e Gás: Produção e Oleodutos - Offshore, Onshore, Petróleo, GLP - Gás Liquefeito de Petróleo
Flowserve Насосы для переработки углеводородов - нефтеперерабатывающей, нефтехимической переработки
Flowserve 油气:生产和管道用泵 - 海上、陆上、合成原油和液体天然气
Flowserve CO2 Capture, Transportation, and Storage Pumps - Pre-Combustion, Post-Combustion, Pipeline, Injection
Flowserve CO2 Transportation and Injection Pumps - DMX - WIK/WIKO - DVSR
Flowserve Pumps for Pipeline Transportation - Crude Oil and Refined Products - Water - Slurry
|Description:||The Flowserve WIK is a multistage barrel pump with a single stage, first stage impeller that is compliant with the latest API 610 (BB5) standards. The WIK is a special purpose pump designed for high-temperature, high-pressure and high-flow applications such as decoking jet, boiler feedwater and water or brine injection.|
|Description:||Rated for discharge pressures to 450 bar (6600 psi),HSO/HDO pumps are manufactured to customer specifications, often exceeding ISO 13709/API 610 (BB5). These pumps feature opposed impellers and dual volute designs, resulting in nearly balanced axial hydraulic thrust over the full operating range of the pumps. • HSO: Single suction, first stage impeller • HDO: Double suction, first stage impeller|
|Description:||The Flowserve DMX is an axially split, multistage pump designed to API 610 (BB3), latest edition. DMX pumps are particularly well suited for process charge, pipeline and injection services where uncompromising reliability over wide ranges is imperative.|
|Description:||The WTB pump is a between bearings, radially split, volute type process pump engineered to provide safe, reliable operation at elevated temperatures and pressures. The two-stage WTB is fully compliant with ISO 13709/API 610 (BB2). The three-stage WTB meets all the key ISO13709/API 610 (BB2) requirements|
HED ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Double Suction, Two Stage Pump
|Description:||The Flowserve HED is a radially split, two stage pump designed to ISO 13709/API 610 (BB2), latest edition. The HED fills the performance gap between the single stage HDX and the double casing multistage lines for high temperature services.|
|Description:||The WCC is a multistage, diffuser type barrel pump with a tandem impeller rotor and a single-diameter balance drum to compensate for residual axial thrust. The radially split inner element facilitates inspection and rapid changeout with a spare.|
|Description:||The WIKO multistage barrel pump features an opposed impeller rotor with diffuser collectors and a single-diameter balance drum. Every WIKO is custom designed and built to order for specific ultra high-pressure applications.|
HDX ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Single Stage Double Suction Pump
|Description:||The HDX pump bridges the flow and pressure disparity between overhung and multistage process pump lines. Fully compliant with the latest ISO 13709/API 610 (BB2) standards, the HDX is engineered for safe, reliable performance at the elevated temperatures and pressures of refining and power applications.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.