| Brand: | Noble Alloy |
|---|---|
| Description: | The Flowserve Noble Alloy 3D small bore valve offers all the standard Noble features in a small 3pc valve. Available in forged… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester 44 series ball valve is the standard in the industry. Designed to ASME B16.34 and with advanced seal… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester Series 45 ball valve offers a large diameter compact Three Piece design. It boasts compactness, low… |
| Brand: | Worcester Controls |
|---|---|
| Description: | Flowserve Worcester's Series 51/52 is a standardized line of flanged ball valves offering tight shut off and leak tight stem… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester 59 series ball valve offers a Full port option to the standard Series 44. Full port capability is… |
| Brand: | Worcester Controls |
|---|---|
| Description: | Flowserve Worcester Series 818/828 flanged full port valves are designed to meet recognized industry standards in a wide… |
| Brand: | Worcester Controls |
|---|---|
| Description: | Flowserve Worcester Series 82/83 flanged full port valves are designed to meet recognized industry standards in a wide variety… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester Series 94 valve sets a new performance standard for both cycle life and leak tightness in all valves.… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester AF/FZ Fire rated valves are the solution to applications where operational integrity must be maintained… |
| Brand: | Noble Alloy |
|---|---|
| Description: | The Flowserve Noble Alloy Custom ball valve is designed to be 100F machined from forged bar/billet for severe service/corrosive… |
| Brand: | Limitorque |
|---|---|
| Description: | The Flowserve Limitorque B320 series of bevel gear operators deliver efficient and dependable operation for multi-turn applications.… |
| Brand: | Byron Jackson |
|---|---|
| Description: | The Flowserve Byron Jackson SUBM submersible motor pump is an oil filled unit built for the most demanding deep well services.… |
| Brand: | IDP |
|---|---|
| Description: | Offering state-of-the-art hydraulics, CPXV ISO vertical sump pump is designed for applications where high performance, superior… |
| Brand: | IDP |
|---|---|
| Description: | The Type CS is a radially split, multistage, ring section pump designed for high pressure services. |
| Brand: | Limitorque |
|---|---|
| Description: | Limitorque announces a unique concept in remote control stations; the CS, which can be provided in two versions; %09The… |
| Brand: | Vogt |
|---|---|
| Description: | Flowserve Vogt Check Valves are forged from fine grain steel and are available with threaded, socket weld, or flanged ends.… |
| Brand: | Noble Alloy |
|---|---|
| Description: | The Flowserve Noble Alloy Condor piston check valve is the choice for difficult check valve applications. The compact and… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester Series D diverter valve is designed to accept flow through the bottom port and direct it out either… |
| Brand: | IDP, United Centrifugal, Byron Jackson |
|---|---|
| Description: | The Flowserve DMX is an axially split, multistage pump designed to API 610 (BB3), latest edition. DMX pumps are particularly… |
| Brand: | Vogt |
|---|---|
| Description: | The Flowserve Vogt Extended End concept has an inherently greater length-strength ratio than the traditional ''valve with… |
| Brand: | Vogt |
|---|---|
| Description: | Flowserve Vogt heavy duty flanged threaded and socket weld end valves are made from rugged fine grained steel forgings. |
| Brand: | Vogt |
|---|---|
| Description: | Flowserve Vogt Gate Valves are designed to operate in a fully open or fully closed position. When open, the media will flow… |
| Brand: | Vogt |
|---|---|
| Description: | Flowserve's Vogt Globe and Angle valves are suitable for throttling as well as shut-off. They are customarily installed… |
| Brand: | Worcester Controls |
|---|---|
| Description: | Flowserve Worcester's Series H44 3-piece ball valve is an advanced design that can take the stress of hydraulic and other… |
| Brand: | Worcester Controls |
|---|---|
| Description: | The Flowserve Worcester Series H71 ball valve is a line of durable ball valves for high pressure fluids to 6000 psi. The… |
| Brand: | Limitorque |
|---|---|
| Description: | The Flowserve Limitorque HBC series of worm gear operators excel in demanding applications, ranging from nuclear power plants… |
| Brand: | IDP, Worthington, Aldrich |
|---|---|
| Description: | The Flowserve HS and YHT reciprocating pumps are horizontal multiplunger designs, engineered with a high degree of flexibility.… |
| Brand: | Aldrich, IDP, Worthington |
|---|---|
| Description: | The Flowserve HS and YHT reciprocating pumps are horizontal multiplunger designs, engineered with a high degree of flexibility.… |
| Brand: | Flowserve |
|---|---|
| Description: | The Flowserve IPS Tempo is pre-engineered specifically for pumps, making the benefits of variable frequency drive (VFD) technology… |
| Brand: | Limitorque |
|---|---|
| Description: | Limitorque's L120 Series multi-turn actuators have a solid record of making valve control easier in a wide variety of demanding… |
| Brand: | Worthington, IDP |
|---|---|
| Description: | The Flowserve LNN is an axially split, double suction pump design featuring 145 impeller and volute combinations resulting… |
| Brand: | Worthington |
|---|---|
| Description: | The Flowserve LNNC is an axially split, double suction pump and is horizontally mounted with bottom suction and side discharge… |
| Brand: | Worthington |
|---|---|
| Description: | The Flowserve LNNV is an axially split, double suction pump and is vertically mounted with in-line suction and discharge… |
| Brand: | IDP |
|---|---|
| Description: | The single stage LR is part of a family of axially split, heavy-duty between bearing pumps that includes the vertical LRV… |
| Brand: | IDP |
|---|---|
| Description: | The MEN single stage, end suction water pump provides reliable operation in a wide variety of applications. |
| Brand: | IDP |
|---|---|
| Description: | MENBLOC is the close-coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical… |
| Brand: | Limitorque |
|---|---|
| Description: | The MT series is a superior combination of a bevel gear operator torque housing with a new thrust base design ideally suited… |
| Brand: | Limitorque |
|---|---|
| Description: | The MX is Flowserve Limitorque's product entry in the non-intrusive, double-sealed, smart electronic actuator marketplace.… |
| Brand: | Durco |
|---|---|
| Description: | The Flowserve Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design… |
| Brand: | Durco |
|---|---|
| Description: | The Flowserve Mark 3 Unitized Self Primer is designed to sit high and dry at ground level and draw from liquid sources below.… |
| Brand: | Vogt |
|---|---|
| Description: | Flowserve Vogt Valves For Meter & Gauge Line Service |
| Brand: | Durco |
|---|---|
| Description: | The Flowserve Durco Microfinish 38 series offers ASME B16.34 quality in an economical valve. The 3 pc valve offers rugged… |
| Brand: | Durco |
|---|---|
| Description: | The Flowserve Durco Microfinish flanged ball valve is an economical valve for general services. Though economical, the valve… |
| Brand: | Limitorque |
|---|---|
| Description: | The Modutronic 20 II is a solid state-integrated circuit-based controller. It is used to operate electric valve actuators… |
| Brand: | Vogt |
|---|---|
| Description: | Our engineers have provided us with the capability to modify Flowserve Vogt Valves with Limitorque or Valtek operators very… |
| Brand: | Limitorque |
|---|---|
| Description: | Flowserve - Limitorque has been a global leader in the development and deployment of network products for electric valve… |
| Brand: | Limitorque |
|---|---|
| Description: | Flowserve Limitorque PT series worm gear operators are the first such devices optimized specifically for motorized operation.… |
| Brand: | Pleuger, IDP |
|---|---|
| Description: | The Flowserve Pleuger SUBM submersible motor pump uses water filled, wet wound motors. This design is environmentally friendly,… |
| Brand: | Durco, Flowserve |
|---|---|
| Description: | The Model KW941 monitors and displays actual power to the pump offering simultaneous protection from underload and overload… |
| Brand: | IDP, Worthington |
|---|---|
| Description: | The Flowserve QL vertical, double-suction pump has a single impeller and true twin-volute design that produces more head… |
| Brand: | Limitorque |
|---|---|
| Description: | Flowserve Limitorque SMB actuators are designed and built to provide years of dependable service in a wide range of environments.… |
| Brand: | Noble Alloy |
|---|---|
| Description: | The Flowserve Noble Alloy swing check valve is the choice for erosive, corrosive services. The valve is manufactured using… |
| Brand: | Noble Alloy |
|---|---|
| Description: | The Flowserve Noble Alloy System II ball valve is designed to be a more economical choice to the Custom Ball valve design.… |
| Brand: | Valtek EMA, Schmidt Armaturen |
|---|---|
| Description: | The FlowPro control valve is a high-performance valve coupled with the high-thrust FlowAct pneumatic diaphragm actuator. |
| Brand: | Valtek EMA, Schmidt Armaturen |
|---|---|
| Description: | The FlowTop control valve is a high-performance, general application valve coupled with the high-thrust FlowAct pneumatic… |
| Brand: | Flowserve |
|---|---|
| Description: | The 304L stainless steel VMX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak… |
| Brand: | IDP, Byron Jackson |
|---|---|
| Description: | Flowserve's VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited… |
| Brand: | Western Land Roller, Worthington, Byron Jackson |
|---|---|
| Description: | Flowserve's VTP vertical turbine pump is a diffuser type, single or multiple stage design for continuous service in wet pit… |
| Brand: | Worthington |
|---|---|
| Description: | The WNC is a diffuser-casing, high-energy, barrel pump found in power plants the world over. Highly efficient and durable,… |
| Brand: | Worthington, IDP |
|---|---|
| Description: | The Flowserve WUJ vertical turbine is a radial flow or axial flow type, multistage, heavy-duty single casing pump. It is… |
| Brand: | IDP |
|---|---|
| Description: | The WXB is a multistage, diffuser-casing barrel pump with tandem impellers and a balance drum to carry axial thrust forces.… |
| Brand: | Flowserve |
|---|---|
| Description: | The WXH pump is a horizontal, radially split, high pressure, ring section pump. It is particularly well suited for boiler… |
| Brand: | Vogt |
|---|---|
| Description: | The body/bonnet threaded connection is designed to support the full longitudinal stress induced by the operating pressure.… |
Flowserve Educational Services offers hands-on training for today's Plant professionals. Browse courses now.
© 2009 Flowserve Corporation